歷屆碩士班學長 – 微熱傳增強研究室

歷屆碩士班學長

  1. Chen, C. -C., Heat Transfer and Fluid Flow Analysis o­n Surface Rippling During Laser Material Processing, MS Thesis, National Sun Yat-Sen University, 1985.
  2. Han, W. -S., Thermal Correlation of Buoyancy Driven Fluid Flow for Air Layers in Vertical Annuli, MS Thesis, National Sun Yat-Sen University, 1986.
  3. Shih, H. -J., Numerical Computation of Laminar Separation and Reattachment of Flow Over Surface Mounted Ribs, MS Thesis , National Sun Yat-Sen University, 1988.
  4. Hong, Y. -J., Separating Flow over Repeated Surface Mounted Ribs in A Square Duct, MS Thesis, National Sun Yat-Sen University, 1988.
  5. Huang, H. -L., Transient Thermal Analysis of the Waterlines Effect in Die Casting Dies, MS Thesis, National Sun Yat-Sen University, 1988.
  6. Tzuoo, D. -C., Numerical Computation of Combined Buoyancy and Thermocapillary-Driven Convection in An Open Cylindrical Enclosure, MS Thesis, National Sun Yat-Sen University, 1988.
  7. Lin, S. -C., Numerical Simulation of Transfer Moulding for Thermosetting Materials, MS Thesis, National Sun Yat-Sen University, 1989.
  8. Lin, T. -Y., Mixed Convection of Opposing/Assisting Flows in Vertical Channels with Discrete Asymmetrically Heated Ribs, MS Thesis, National Sun Yat-Sen University, 1989.
  9. Wen, M.. -Y., Numerical Analysis of Solidification Thin-Walled Rectangular Enclosures of Different Aspect Ratios, MS Thesis, National Sun Yat-Sen University, 1989.
  10. Luo, S. -F., Laminar Forced Correction for Surface Mounted Ribs, MS Thesis, National Sun Yat-Sen University, 1989.
  11. Hou, Y. -S., An Experimental Study of Laminar Entrance Flow in Finned Tube Annuli, MS Thesis, National Sun Yat-Sen University, 1990.
  12. Chou, W. -F., Augmentative Heat Transfer for a Vertical 2-pass Tube through an Air Box by Use of Strip Type Inserts, MS Thesis, National Sun Yat-Sen University, 1990.
  13. Kuo, N. -H., Analysis of Evaporation in the Presence of Composition/ Temperature Gradients Induced Natural Convection, MS Thesis, National Sun Yat-Sen University, 1991.
  14. Lin, C. -C., An Experimental Study of Laminar Entrance Flow and Heat Transfer in Finned Tube Annuli, MS Thesis, National Sun Yat-Sen University, 1991.
  15. Kuo, M. -T., An Experimental Study of Augmentation of Tube-Side Heat Transfer in a Cross Flow Heat Exchanger by Means of Strip Type Inserts, MS Thesis, National Sun Yat-Sen University, 1991.
  16. Jeng, S. -R., 3-D Laminar Forced Convection in a Rotating Square Duct with a Rib o­n Leading Wall, MS Thesis, National Sun Yat-Sen University, 1991.
  17. Lin, Y. -J., Fluid and Thermal Characteristics of Two Circular Cylinders Arranged in Cruciform, MS Thesis, National Sun Yat-Sen University, 1992.
  18. Zih, G. -M., Numerical and Experimental Study of Augmentation of Tube-Side Heat Transfer in a Cross Flow Heat Exchanger, MS Thesis, National Sun Yat-Sen University, 1992.
  19. Wang, C. -Y., Experimental Study of Three-Dimensional Natural Convection in Enclosures with Different Working Fluids, MS Thesis, National Sun Yat-Sen University, 1993.
  20. Yang, S. -S., Transient Three-Dimensional Natural Convection in a Rectangular Enclosure, MS Thesis, National Sun Yat-Sen University, 1995.
  21. Liou, W. J., Uneven Wall Heat Flux Effect o­n Local Heat Transfer in Rotating Two Pass Channels with two Oppositely Ribbed Walls, MS Thesis, National Sun Yat-Sen University, 1995.
  22. Wang, Y. -S., Local Heat Transfer and Velocity Measurements in a Rotating Two-Pass Square Channel with Uneven Wall Temperatures, MS Thesis, National Sun Yat-Sen University, 1995.
  23. Chiou, C. -C., Pool Boiling Modeling o­n Rib-Roughened Surfaces, MS Thesis, National Sun Yat-Sen University, 1995.
  24. Lin, J. -C., Numerical Study of Turbulent Heat Transfer in a Circular Duct with Strip-Type Inserts, MS Thesis, National Sun Yat-Sen University, 1995.
  25. Liu, M. -H., An Experimental Study of Turbulent Heat Transfer in a Horizontal Circular Tube with Strip Type Inserts, MS Thesis, National Sun Yat-Sen University, 1996.
  26. Wu, F. -Y., An Experimental Study of Turbulent Flow and Pressure Drop in a Horizontal Circular Tube with Strip Type Inserts, MS Thesis, National Sun Yat-Sen University, 1996.
  27. Chiang, M. -H., Velocity Measurements in a Rotating Two-Pass Square Channel with Two Oppositely Ribbed Walls, MS Thesis, National Sun Yat-Sen University, 1996.
  28. Huang, I. -W., Laminar Heat Transfer and Flow Characteristics in a Horizontal Tube with Strip-Type Inserts, MS Thesis, National Sun Yat-Sen University, 1997.
  29. Chen, P. -J., Velocity Measurements in a Rotating Two-Pass Square Channel with/ without Two Oppositely Ribbed Walls, MS Thesis, National Sun Yat-Sen University, 1997.
  30. Chang, L. -C., A Numerical Study of Developing 3-D Turbulent Mixed Convection in a Circular Tube Inserted with Longitudinal Strips, MS Thesis, National Sun Yat-Sen University, 1997.
  31. Chin H. -J., Turbulent Flow in a Rotating Two Pass Channel with/ without Turbulators, MS Thesis, National Sun Yat-Sen University, 1998.
  32. Huang, M. -T., Evaporative Heat Transfer and Enhancement Performance of Serpentine Tubes with Strip-Type Insert with R-134a,MS Thesis, National Sun Yat-Sen University, 1998.
  33. Tsai, Y. -C., Evaporation Heat Transfer and Pressure Drop in Horizontal Tubes with Strip-Type Inserts using R-600a, MS Thesis, National Sun Yat-Sen University, 1999.
  34. Liu, C. -F., Impingement Cooling in a Rotating Ribbed Square Duct with Crossflow Effect from Different Arrays of Jets, MS Thesis, National Sun Yat-Sen University, 1999.
  35. Liao, H. -C., Local Heat Transfer and Pressure Drop in a Rotating Two-Pass Ribbed Rectangular Channel,MS Thesis, National Sun Yat-Sen University, 1999.
  36. Yang, T. -Y., Nucleate Pool Boiling from Coated and Spirally Wrapped Tubes in Saturated R-134a and R-600a, MS Thesis, National Sun Yat-San University, 2000.
  37. Tai, H. -H., Local Heat Transfer in Rotating Square Roughened Channels with Jet Impingement, MS Thesis, National Sun Yat-San University, 2001.
  38. Huang, G. -Z., Nucleate Pool Boiling Characteristics from Coated Tube Bundles in Saturated R-134a, MS Thesis, National Sun Yat-San University, 2001.
  39. Ke, C. -G., Bubble Dynamic Parameters Pool Boiling Transfer o­n Plasma Coated Tubes in Saturated R-134a and R-600a, MS Thesis, National Sun Yat-San University, 2001.
  40. Chou, S. -C., Impingement Cooling in a Rotating Square Smooth Channel Using Transient Liquid Crystal Techniques, MS Thesis, National Sun Yat-San University, 2002.
  41. Lai, W. -C., LDV Assisted Bubble Dynamic Parameters Measurements of Pool Nucleate Boiling in a Saturated R-134a from Plasma Coated Twin-Tubes, MS Thesis, National Sun Yat-San University, 2002.
  42. Chien, C. M., MEMS Fabrication and Study of a Microchannel Gas Flow, MS Thesis, National Sun Yat-San University, 2002.
  43. Wang, I. T., Simulation of Gaseous Flow in a Microchannel, MS Thesis, National Sun Yat-Sen University, 2003.
  44. Fan, T. -C., A Study of Liquid Spray Cooling, MS Thesis, National Sun Yat-Sen University, 2003.
  45. Lin, C. -Y., Flow Visualization and Velocity Measurement in a Liquid Microchannel, MS Thesis, National Sun Yat-Sen University , 2004.
  46. Huang, C. -F., Fabrications of Micro Heaters and Micro Sensors, MS Thesis, National Sun Yat-Sen University , 2004.
  47. Kao, J. -K., Design and Microfabrications for Micro PEMFCs, MS Thesis, National Sun Yat-Sen University , 2004.
  48. Ling, H.-C., Electroosmotic Flows in a Square Microchannel, MS Thesis, NationalSunYat-SenUniversity, 2005.
  49. Yang, S.-H., Design, Fabrication and Electrochemical Impedance Spectroscopy for Microfuel Cell, NationalSunYat-SenUniversity, 2005.
  50. Tien, C.-H., R-134a/Distilled Water Spray Droplets Size(d32) Distribution and Velocity Temperature Measurements, NationalSunYat-SenUniversity, 2005.
  51. Liu, C.-H., Stretching and Deforming DNA Molecules in Micro Flows, MS Thesis, NationalSunYat-SenUniversity, 2006.
  52. Feng, C.-L., A Novel Design/Fabrication for Micro Fuel Cell Stack Bipolar Plates and Performance Tests, MS Thesis, National Sun Yat-Sen University, 2006.
  53. Yang, T.-K., Experimental Study of Electroosmotic Flow in Microchannels with Velocity/Temperature Measurements, MS Thesis, National Sun Yat-Sen University, 2007.
  54. Huang, Y.-C., Passive Mixing Enhancements in Different Geometric Microchannels with Roughened Surfaces, MS Thesis, National Sun Yat-Sen University, 2007.
  55. Liou, J.-H., Stretching and Deformation of DNA Molecules in Converging-Diverging Microchannels, MS Thesis, National Sun Yat-Sen University, 2007.
  56. Huang,Y-J., Micro Proton Exchange Membrane Fuel Cell Transient Current Distribution and Product Water Measurements, MS Thesis, National Sun Yat-Sen University, 2008.
  57. Chu, K. -M., Effects of Open Ratio of Flow Field Plates on a Micro PEM Fuel Cell Performance and Its Transient Thermal Behavior, MS Thesis, National Sun Yat-Sen University, 2008.
  58. Lin, J. -W., Mixing Efficiency of Y-type Mixer with Joule Heating Effect, MS Thesis, National Sun Yat-Sen University, 2009.
  59. Tsai, C. -F., Stretching and Deformation of DNA Molecules in a Converging-Diverging Microchannel with Heating Effect, MS Thesis, National Sun Yat-Sen University, 2009.
  60. Chen, W. -C., Effect of Different Flow-Fields on μDMFC Performance, MS Thesis, National Sun Yat-Sen University, 2009.
  61. Su, K. -C., Chaotic Mixing in Helical Microchannels, MS Thesis, National Sun Yat-Sen University, 2009.
  62. Lin, C. -J., DNA Molecules Stretching in Torus-Type Microchannels, MS Thesis, National Sun Yat-Sen University, 2010.
  63. Chen, Z. -Y., A Novel Design of μPEM Fuel Cell with a Hydrogen Generator System, MS Thesis, National Sun Yat-Sen University, 2010.
  64. Wu, J. -W., Effect of Methanol and Water Crossover on the Cell Performance, MS Thesis, National Sun Yat-Sen University, 2010.
  65. Yeh, J. -L., Effect of Hydrogen Inlets on Planar μPEM Fuel Cell Stacks, MS Thesis, National Sun Yat-Sen University, 2010.
  66. Chen, J. -W., Characterization of Water Spray Temperature Distribution and Liquid Film Growth Processes, MS Thesis, National Sun Yat-Sen University, 2011.
  67. Wang, H. -B., Visualization of CO2 Gas Bubbles Generation / Removal in Anode and Performance Analysis of a μDMFC, MS Thesis, National Sun Yat-Sen University, 2011.                                                                                                                                    
  68. Lin, C. -W., Effect of Shear Stress of Near-Wall on DNA Molecules Stretching in Microchannels, MS Thesis, National Sun Yat-Sen University, 2011.
  69. Tsai, I. -C., Performance Analysis of a Micro-PEM Fuel Cell with Different Flowfields and Hydrophobic/ Hydrophilic Gas Diffusion Layers, MS Thesis, National Sun Yat-Sen University, 2012.
  70. Jheng, Q. -H., Spary Droplet Diameter and Flowfield Characteristic Analysis, MS Thesis, National Sun Yat-Sen University, 2012.
  71. Lu, C. -Y., Design and Performance Analysis of a Miniature Spray Cooling System, MS Thesis, National Sun Yat-Sen University, 2012.
  72. Su, Y. -W., Performance Test and Electrochemical Impedance Spectroscopy /Cyclic Voltammetry for a μPEM Fuel Cell, MS Thesis, National Sun Yat-Sen University, 2012.
  73. Yang, Y. -J., The Design, Fabrication and Performance Analysis of a Flexible Heat Pipe, MS Thesis, National Sun Yat-Sen University, 2012.
  74. Hsu, Y, -F., Thermal Characteristics of High Power LED Cooling by an Ultrasonic Micro-nozzle Plate, MS Thesis, National Sun Yat-Sen University, 2012.
  75. Wang, M. -L., Thermal Characteristics of High Power LED Cooling by Ultrasonic Micro-nozzle Plate Arrays, MS Thesis, National Sun Yat-Sen University, 2012.
  76. Chen, I. -C., Fabrication and Performance Analysis of Planar Micro Direct Methanol Fuel Cell Stacks with Air-breathing, MS Thesis, National Sun Yat-Sen University, 2013.
  77. Wu, F. -H., Stretching of DNA Molecules and Flow Phenomena in a Closed-loop Microchannel, MS Thesis, National Sun Yat-Sen University, 2013.
  78. Huang, C. -C., λDNA Hydrodynamics Stretching in Microchannels with Different Micropillar Arrays, MS Thesis, National Sun Yat-Sen University, 2013.
  79. Luo, S.-Y., Performance Analysis and Visualization of Thermal hydraulics Characteristics of Liquid Spray through Micro-nozzle Plate Arrays, National Sun Yat-Sen University, 2014.
  80. He, C. -C., Effect of Different Flow Fields on the Cell Performance of a Passive μDMFC, National Sun Yat-Sen University, 2014.
  81. Liu, H. –H., Nanofluids Spray Cooling, National Sun Yat-Sen University, 2015.
  82. Hung, L. –C., Performance Analysis for Micro Direct Methanol Fuel Cell through Electrochemical Impedance Spectroscopy and Cyclic Voltammetry, 2016.
  83. Li, S. -Y., nPIV/RILF Measurements in Microchannel Flows with Hydrophilic/Hydrophobic Surfaces, MS Thesis, National Sun Yat-Sen University, 2016.
  84. Tsai, M. –J., Stretching of DNA Molecules and Flow Field Characteristic in Semi-Circle and Quartered-Circle Microchannels, 2016.
  85. Lin, M. –S., Flow/Heat Transfer Characteristics Analysis of Spray Cooling, MS Thesis, National Sun Yat-Sen University, 2016.  
  86. Yeh, Y.-F., Spray Cooling Thermal and Flow Characteristics for High Power Electronic Devices, MS Thesis, National Sun Yat-Sen University, 2017.
  87. Chang, W.-C., Thin Film Roughened Surface Effect on Spray Cooling Heat Transfer, MS Thesis, National Sun Yat-Sen University, 2017.
  88. Liu, C.-C., Flow Channel Visualization and Velocity/ Temperature/ Concentration Measurements of an Air-breathing Micro Direct Methanol Fuel Cell, MS Thesis, National Sun Yat-Sen University, 2017.
  89. Lu, Y.-M., Flow Field and Heat Transfer Characteristics Analysis of Water Spray Through a Single Micro-nozzle Plate, MS Thesis, National Sun Yat-Sen University, 2017.
  90. Hsieh, Y.-C., Heat Transfer Enhancement in Microchannels with Roughened Surface, MS Thesis, National Sun Yat-Sen University, 2017.