Graduated MS – 微熱傳增強研究室

Graduated MS

  1. Chen, C. -C., Heat Transfer and Fluid Flow Analysis o­n Surface Rippling During Laser Material Processing, MS Thesis, National Sun Yat-Sen University, 1985.
  2. Han, W. -S., Thermal Correlation of Buoyancy Driven Fluid Flow for Air Layers in Vertical Annuli, MS Thesis, National Sun Yat-Sen University, 1986.
  3. Shih, H. -J., Numerical Computation of Laminar Separation and Reattachment of Flow Over Surface Mounted Ribs, MS Thesis , National Sun Yat-Sen University, 1988.
  4. Hong, Y. -J., Separating Flow over Repeated Surface Mounted Ribs in A Square Duct, MS Thesis, National Sun Yat-Sen University, 1988.
  5. Huang, H. -L., Transient Thermal Analysis of the Waterlines Effect in Die Casting Dies, MS Thesis, National Sun Yat-Sen University, 1988.
  6. Tzuoo, D. -C., Numerical Computation of Combined Buoyancy and Thermocapillary-Driven Convection in An Open Cylindrical Enclosure, MS Thesis, National Sun Yat-Sen University, 1988.
  7. Lin, S. -C., Numerical Simulation of Transfer Moulding for Thermosetting Materials, MS Thesis, National Sun Yat-Sen University, 1989.
  8. Lin, T. -Y., Mixed Convection of Opposing/Assisting Flows in Vertical Channels with Discrete Asymmetrically Heated Ribs, MS Thesis, National Sun Yat-Sen University, 1989.
  9. Wen, M.. -Y., Numerical Analysis of Solidification Thin-Walled Rectangular Enclosures of Different Aspect Ratios, MS Thesis, National Sun Yat-Sen University, 1989.
  10. Luo, S. -F., Laminar Forced Correction for Surface Mounted Ribs, MS Thesis, National Sun Yat-Sen University, 1989.
  11. Hou, Y. -S., An Experimental Study of Laminar Entrance Flow in Finned Tube Annuli, MS Thesis, National Sun Yat-Sen University, 1990.
  12. Chou, W. -F., Augmentative Heat Transfer for a Vertical 2-pass Tube through an Air Box by Use of Strip Type Inserts, MS Thesis, National Sun Yat-Sen University, 1990.
  13. Kuo, N. -H., Analysis of Evaporation in the Presence of Composition/ Temperature Gradients Induced Natural Convection, MS Thesis, National Sun Yat-Sen University, 1991.
  14. Lin, C. -C., An Experimental Study of Laminar Entrance Flow and Heat Transfer in Finned Tube Annuli, MS Thesis, National Sun Yat-Sen University, 1991.
  15. Kuo, M. -T., An Experimental Study of Augmentation of Tube-Side Heat Transfer in a Cross Flow Heat Exchanger by Means of Strip Type Inserts, MS Thesis, National Sun Yat-Sen University, 1991.
  16. Jeng, S. -R., 3-D Laminar Forced Convection in a Rotating Square Duct with a Rib o­n Leading Wall, MS Thesis, National Sun Yat-Sen University, 1991.
  17. Lin, Y. -J., Fluid and Thermal Characteristics of Two Circular Cylinders Arranged in Cruciform, MS Thesis, National Sun Yat-Sen University, 1992.
  18. Zih, G. -M., Numerical and Experimental Study of Augmentation of Tube-Side Heat Transfer in a Cross Flow Heat Exchanger, MS Thesis, National Sun Yat-Sen University, 1992.
  19. Wang, C. -Y., Experimental Study of Three-Dimensional Natural Convection in Enclosures with Different Working Fluids, MS Thesis, National Sun Yat-Sen University, 1993.
  20. Yang, S. -S., Transient Three-Dimensional Natural Convection in a Rectangular Enclosure, MS Thesis, National Sun Yat-Sen University, 1995.
  21. Liou, W. J., Uneven Wall Heat Flux Effect o­n Local Heat Transfer in Rotating Two Pass Channels with two Oppositely Ribbed Walls, MS Thesis, National Sun Yat-Sen University, 1995.
  22. Wang, Y. -S., Local Heat Transfer and Velocity Measurements in a Rotating Two-Pass Square Channel with Uneven Wall Temperatures, MS Thesis, National Sun Yat-Sen University, 1995.
  23. Chiou, C. -C., Pool Boiling Modeling o­n Rib-Roughened Surfaces, MS Thesis, National Sun Yat-Sen University, 1995.
  24. Lin, J. -C., Numerical Study of Turbulent Heat Transfer in a Circular Duct with Strip-Type Inserts, MS Thesis, National Sun Yat-Sen University, 1995.
  25. Liu, M. -H., An Experimental Study of Turbulent Heat Transfer in a Horizontal Circular Tube with Strip Type Inserts, MS Thesis, National Sun Yat-Sen University, 1996.
  26. Wu, F. -Y., An Experimental Study of Turbulent Flow and Pressure Drop in a Horizontal Circular Tube with Strip Type Inserts, MS Thesis, National Sun Yat-Sen University, 1996.
  27. Chiang, M. -H., Velocity Measurements in a Rotating Two-Pass Square Channel with Two Oppositely Ribbed Walls, MS Thesis, National Sun Yat-Sen University, 1996.
  28. Huang, I. -W., Laminar Heat Transfer and Flow Characteristics in a Horizontal Tube with Strip-Type Inserts, MS Thesis, National Sun Yat-Sen University, 1997.
  29. Chen, P. -J., Velocity Measurements in a Rotating Two-Pass Square Channel with/ without Two Oppositely Ribbed Walls, MS Thesis, National Sun Yat-Sen University, 1997.
  30. Chang, L. -C., A Numerical Study of Developing 3-D Turbulent Mixed Convection in a Circular Tube Inserted with Longitudinal Strips, MS Thesis, National Sun Yat-Sen University, 1997.
  31. Chin H. -J., Turbulent Flow in a Rotating Two Pass Channel with/ without Turbulators, MS Thesis, National Sun Yat-Sen University, 1998.
  32. Huang, M. -T., Evaporative Heat Transfer and Enhancement Performance of Serpentine Tubes with Strip-Type Insert with R-134a,MS Thesis, National Sun Yat-Sen University, 1998.
  33. Tsai, Y. -C., Evaporation Heat Transfer and Pressure Drop in Horizontal Tubes with Strip-Type Inserts using R-600a, MS Thesis, National Sun Yat-Sen University, 1999.
  34. Liu, C. -F., Impingement Cooling in a Rotating Ribbed Square Duct with Crossflow Effect from Different Arrays of Jets, MS Thesis, National Sun Yat-Sen University, 1999.
  35. Liao, H. -C., Local Heat Transfer and Pressure Drop in a Rotating Two-Pass Ribbed Rectangular Channel,MS Thesis, National Sun Yat-Sen University, 1999.
  36. Yang, T. -Y., Nucleate Pool Boiling from Coated and Spirally Wrapped Tubes in Saturated R-134a and R-600a, MS Thesis, National Sun Yat-San University, 2000.
  37. Tai, H. -H., Local Heat Transfer in Rotating Square Roughened Channels with Jet Impingement, MS Thesis, National Sun Yat-San University, 2001.
  38. Huang, G. -Z., Nucleate Pool Boiling Characteristics from Coated Tube Bundles in Saturated R-134a, MS Thesis, National Sun Yat-San University, 2001.
  39. Ke, C. -G., Bubble Dynamic Parameters Pool Boiling Transfer o­n Plasma Coated Tubes in Saturated R-134a and R-600a, MS Thesis, National Sun Yat-San University, 2001.
  40. Chou, S. -C., Impingement Cooling in a Rotating Square Smooth Channel Using Transient Liquid Crystal Techniques, MS Thesis, National Sun Yat-San University, 2002.
  41. Lai, W. -C., LDV Assisted Bubble Dynamic Parameters Measurements of Pool Nucleate Boiling in a Saturated R-134a from Plasma Coated Twin-Tubes, MS Thesis, National Sun Yat-San University, 2002.
  42. Chien, C. M., MEMS Fabrication and Study of a Microchannel Gas Flow, MS Thesis, National Sun Yat-San University, 2002.
  43. Wang, I. T., Simulation of Gaseous Flow in a Microchannel, MS Thesis, National Sun Yat-Sen University, 2003.
  44. Fan, T. -C., A Study of Liquid Spray Cooling, MS Thesis, National Sun Yat-Sen University, 2003.
  45. Lin, C. -Y., Flow Visualization and Velocity Measurement in a Liquid Microchannel, MS Thesis, National Sun Yat-Sen University , 2004.
  46. Huang, C. -F., Fabrications of Micro Heaters and Micro Sensors, MS Thesis, National Sun Yat-Sen University , 2004.
  47. Kao, J. -K., Design and Microfabrications for Micro PEMFCs, MS Thesis, National Sun Yat-Sen University , 2004.
  48. Ling, H.-C., Electroosmotic Flows in a Square Microchannel, MS Thesis, NationalSunYat-SenUniversity, 2005.
  49. Yang, S.-H., Design, Fabrication and Electrochemical Impedance Spectroscopy for Microfuel Cell, NationalSunYat-SenUniversity, 2005.
  50. Tien, C.-H., R-134a/Distilled Water Spray Droplets Size(d32) Distribution and Velocity Temperature Measurements, NationalSunYat-SenUniversity, 2005.
  51. Liu, C.-H., Stretching and Deforming DNA Molecules in Micro Flows, MS Thesis, NationalSunYat-SenUniversity, 2006.
  52. Feng, C.-L., A Novel Design/Fabrication for Micro Fuel Cell Stack Bipolar Plates and Performance Tests, MS Thesis, National Sun Yat-Sen University, 2006.
  53. Yang, T.-K., Experimental Study of Electroosmotic Flow in Microchannels with Velocity/Temperature Measurements, MS Thesis, National Sun Yat-Sen University, 2007.
  54. Huang, Y.-C., Passive Mixing Enhancements in Different Geometric Microchannels with Roughened Surfaces, MS Thesis, National Sun Yat-Sen University, 2007.
  55. Liou, J.-H., Stretching and Deformation of DNA Molecules in Converging-Diverging Microchannels, MS Thesis, National Sun Yat-Sen University, 2007.
  56. Huang,Y-J., Micro Proton Exchange Membrane Fuel Cell Transient Current Distribution and Product Water Measurements, MS Thesis, National Sun Yat-Sen University, 2008.
  57. Chu, K. -M., Effects of Open Ratio of Flow Field Plates on a Micro PEM Fuel Cell Performance and Its Transient Thermal Behavior, MS Thesis, National Sun Yat-Sen University, 2008.
  58. Lin, J. -W., Mixing Efficiency of Y-type Mixer with Joule Heating Effect, MS Thesis, National Sun Yat-Sen University, 2009.
  59. Tsai, C. -F., Stretching and Deformation of DNA Molecules in a Converging-Diverging Microchannel with Heating Effect, MS Thesis, National Sun Yat-Sen University, 2009.
  60. Chen, W. -C., Effect of Different Flow-Fields on μDMFC Performance, MS Thesis, National Sun Yat-Sen University, 2009.
  61. Su, K. -C., Chaotic Mixing in Helical Microchannels, MS Thesis, National Sun Yat-Sen University, 2009.
  62. Lin, C. -J., DNA Molecules Stretching in Torus-Type Microchannels, MS Thesis, National Sun Yat-Sen University, 2010.
  63. Chen, Z. -Y., A Novel Design of μPEM Fuel Cell with a Hydrogen Generator System, MS Thesis, National Sun Yat-Sen University, 2010.
  64. Wu, J. -W., Effect of Methanol and Water Crossover on the Cell Performance, MS Thesis, National Sun Yat-Sen University, 2010.
  65. Yeh, J. -L., Effect of Hydrogen Inlets on Planar μPEM Fuel Cell Stacks, MS Thesis, National Sun Yat-Sen University, 2010.
  66. Chen, J. -W., Characterization of Water Spray Temperature Distribution and Liquid Film Growth Processes, MS Thesis, National Sun Yat-Sen University, 2011.
  67. Wang, H. -B., Visualization of CO2 Gas Bubbles Generation / Removal in Anode and Performance Analysis of a μDMFC, MS Thesis, National Sun Yat-Sen University, 2011.                                                                                                                                    
  68. Lin, C. -W., Effect of Shear Stress of Near-Wall on DNA Molecules Stretching in Microchannels, MS Thesis, National Sun Yat-Sen University, 2011.
  69. Tsai, I. -C., Performance Analysis of a Micro-PEM Fuel Cell with Different Flowfields and Hydrophobic/ Hydrophilic Gas Diffusion Layers, MS Thesis, National Sun Yat-Sen University, 2012.
  70. Jheng, Q. -H., Spary Droplet Diameter and Flowfield Characteristic Analysis, MS Thesis, National Sun Yat-Sen University, 2012.
  71. Lu, C. -Y., Design and Performance Analysis of a Miniature Spray Cooling System, MS Thesis, National Sun Yat-Sen University, 2012.
  72. Su, Y. -W., Performance Test and Electrochemical Impedance Spectroscopy /Cyclic Voltammetry for a μPEM Fuel Cell, MS Thesis, National Sun Yat-Sen University, 2012.
  73. Yang, Y. -J., The Design, Fabrication and Performance Analysis of a Flexible Heat Pipe, MS Thesis, National Sun Yat-Sen University, 2012.
  74. Hsu, Y, -F., Thermal Characteristics of High Power LED Cooling by an Ultrasonic Micro-nozzle Plate, MS Thesis, National Sun Yat-Sen University, 2012.
  75. Wang, M. -L., Thermal Characteristics of High Power LED Cooling by Ultrasonic Micro-nozzle Plate Arrays, MS Thesis, National Sun Yat-Sen University, 2012.
  76. Chen, I. -C., Fabrication and Performance Analysis of Planar Micro Direct Methanol Fuel Cell Stacks with Air-breathing, MS Thesis, National Sun Yat-Sen University, 2013.
  77. Wu, F. -H., Stretching of DNA Molecules and Flow Phenomena in a Closed-loop Microchannel, MS Thesis, National Sun Yat-Sen University, 2013.
  78. Huang, C. -C., λDNA Hydrodynamics Stretching in Microchannels with Different Micropillar Arrays, MS Thesis, National Sun Yat-Sen University, 2013.
  79. Luo, S.-Y., Performance Analysis and Visualization of Thermal hydraulics Characteristics of Liquid Spray through Micro-nozzle Plate Arrays, National Sun Yat-Sen University, 2014.
  80. He, C. -C., Effect of Different Flow Fields on the Cell Performance of a Passive μDMFC, National Sun Yat-Sen University, 2014.
  81. Liu, H. –H., Nanofluids Spray Cooling, National Sun Yat-Sen University, 2015.
  82. Hung, L. –C., Performance Analysis for Micro Direct Methanol Fuel Cell through Electrochemical Impedance Spectroscopy and Cyclic Voltammetry, 2015.
  83. Tsai, M. –J., Stretching of DNA Molecules and Flow Field Characteristic in Semi-Circle and Quartered-Circle Microchannels, 2015.
  84. Lin, M. –S., Flow/Heat Transfer Characteristics Analysis of Spray Cooling, MS Thesis, National Sun Yat-Sen University, 2016.